htmlstart 201910_boat . Boat Building
jpg 20191003_3193 . 1 BC EB Controls installed. Working on forward helm.
jpg 20191003_3195 . 1 BC EB Exiting the fo'c'sle
jpg 20191004_3196 . 1 BC EB Setting up to cut lengths of stainless tubing
jpg 20191004_3197 . 1 BC EB Adjusting to cut 10"
jpg 20191004_3205 . 1 BC EB Cutting with angle grinder and cut-off disc
jpg 20191004_3206 . 1 BC EB Three railing stanchions in place temporarily
jpg 20191004_3207 . 1 BC EB Testing for rail height
jpg 20191005_3215 . 1 BC EB Drilling for railing base bolts
jpg 20191005_3216 . 1 BC EB Attaching a railing base
jpg 20191005_3217 . 1 BC EB Starboard railing bases bolted (temporary)
jpg 20191006_3220 . 1 BC EB Cutting a long section of railing
jpg 20191006_3225 . 1 BC EB Railings installed temporarily. We are short the 4' transom piece.
jpg 20191006_3228 . 1 BC EB Port railing
jpg 20191007_3232 . 1 BC EB Looking down at railing angle issue
jpg 20191009_3242 . 1 BC EB Grab rails installed
jpg 20191010_3245 . 1 BC EB Jig to position motor mount
jpg 20191010_3244 . 1 BC EB Motor mount positioned for hole drilling
jpg 20191010_3247 . 1 BC EB Motor mount installed
jpg 20191013_3249 . 1 BC EB Marking drill hole for foredeck cleat
jpg 20191013_3250 . 1 BC EB Drilling foredeck cleat hole
jpg 20191013_3251 . 1 BC EB Applying sealant to window frame
jpg 20191013_3252 . 1 BC EB Aft helm window installed
jpg 20191014_3254 . 1 BC EB Caulking port side window
jpg 20191014_3255 . 1 BC EB Screwing window home
jpg 20191015_3258 . 1 BC EB Securing port windshield
jpg 20191015_3263 . 1 BC EB Windshields installed
jpg 20191016_3274 . 1 BC EB All windows installed
jpg 20191017_3276 . 1 BC EB Martha giving the cabin door a shower
jpg 20191017_3277 . 1 BC EB Door clean, ready to install. Gunwales painted with non-skid.
jpg 20191018_3281 . 1 BC EB Jig for bending 1/4" copper tubing
jpg 20191018_3282 . 1 BC EB Working on dual controls shift junction connections
jpg 20191019_3286 . 1 BC EB Working on dual controls shift junction connections
jpg 20191019_3287 . 1 BC EB Working on dual controls shift junction connections
jpg 20191021_3292 . 1 BC EB One of seven bilge breather tubes. Without these the bilge comartments would be air tight.
jpg 20191022_3295 . 1 BC EB Securing a breather tube to frame
jpg 20191022_3297 . 1 BC EB Breather tubes and cleats installed
jpg 20191023_3301 . 1 BC EB Butyl sealant applied - door ready to install
jpg 20191023_3304 . 1 BC EB Screwing in interior door frame
jpg 20191023_3305 . 1 BC EB Cabin door installed
jpg 20191023_3305 . 1 BC EB Installing afterdeck railings
jpg 20191024_3316 . 1 BC EB The last railing cut
jpg 20191024_3318 . 1 BC EB Securing railing set screws
jpg 20191024_3322 . 1 BC EB Looking good
jpg 20191024_3323 . 1 BC EB Railing complete
jpg 20191030_3330 . 1 BC EB October 30 - we have done all we can this year
jpg 20191030_3331 . 1 BC EB Only a few days work to be done in 2020