htmlstart boat2 . September 2013 - More boat building
txt Sept 26 - Freeing the boat from its foundation
txt Sept 27 - Starting to cradle the boat
txt Sept 28 - Turning the boat: The idea is to jack the boat high enough so it will rotate in its rope cradle.
txt                 Stretch in the lines prevented this. It was up but not high enough. Doug George, Big Dave and
txt                 Sam Anderson had to lift, drag, push and pull to force it over.
txt                 A video will be posted after it is edited.
jpg 130926_1470 . 1 BC EB From inside - the "nose cone"
jpg 130926_1471 . 1 BC EB Looking aft
jpg 130926_1478 . 1 BC EB Looking forward
jpg 130926_1479 . 1 BC EB Peter crawling out after removing<br>some fetters
jpg 130926_1484 . 1 BC EB Jacking to see if boat is truly free
jpg 130926_1487 . 1 BC EB It is!
jpg 130926_1492 . 1 BC EB Line "cradle" is rigged
jpg 130927_1132 . 1 BC EB Jacking up boat near bow-<br>jack is underneath
jpg 130927_1133 . 1 BC EB Three lines will form a cradle<br>when boat is two feet higher
jpg 130927_1134 . 1 BC EB Jacking up boat at the transom
jpg 130928_1143 . 1 BC EB Martha and Doug rigging lifting line
jpg 130928_1496 . 1 BC EB Peter attempting to tie a bowline
jpg 130928_1498 . 1 BC EB Forward lifting line
jpg 130928_1503 . 1 BC EB Doug thinking
jpg 130928_1504 . 1 BC EB Doug explaining to Peter
jpg 130928_1507 . 1 BC EB Boat rolled about 45 degrees
jpg 130928_1508 . 1 BC EB Big Dave, Doug, Sam
jpg 130928_1510 . 1 BC EB Boat right side up
jpg 130928_1511 . 1 BC EB Sam's Diva
jpg 130928_1515 . 1 BC EB Looking forward
jpg 130928_1516 . 1 BC EB Looking aft
htmlend