htmlstart boat . July 2011 - Boat Building
jpg 110705_0458m . 1 BC EB Fairing the keelson
jpg 110705_0459m . 1 BC EB Fairing the keelson
jpg 110705_0461m . 1 BC EB Rope slings help position side panels
jpg 110705_0462m . 1 BC EB Next - attach two side panels with a butt block
jpg 110705_0463m . 1 BC EB Looking aft
jpg 110706_0476m . 1 BC EB Prep for gluing: sanding  where side meets frame.<br>The Dremel 6100 is a fantastic multi-purpose tool.
jpg 110706_0478m . 1 BC EB 110706_0478m
jpg 110706_0479m . 1 BC EB Paint joint with straight epoxy,<br>then with glue mix
jpg 110707_0486m . 1 BC EB Starboard side panel fully attached - at long last
jpg 110707_0488m . 1 BC EB Looking forward
jpg 110707_0490m . 1 BC EB 110707_0490m
jpg 110707_0493m . 1 BC EB 110707_0493m
jpg 110708_0495m . 1 BC EB Fairing a port side frame
jpg 110708_0496m . 1 BC EB Making a port side butt joint
jpg 110721_0467p . 1 BC EB Butt joint screwed and glued to port side forward sections 
jpg 110726_0006p . 1 BC EB Port side forward sections glued and screwed
jpg 110726_0007p . 1 BC EB Port side forward sections glued and screwed
htmlend