20170902_03967.jpg Edna Bay, BC - 2017 Removing excess material from new fillet
| 20170902_03972.jpg Edna Bay, BC - 2017 Tipping with brush after rolling on epoxy
| 20170903_03986.jpg Edna Bay, BC - 2017 Cabin sole finished at last
|
20170916_04142.jpg Edna Bay, BC - 2017 Red cedar for rub rail - we got it years ago from George
| 20170916_04146.jpg Edna Bay, BC - 2017 Trimming for fairness
| 20170916_04147.jpg Edna Bay, BC - 2017 Cutting a rub rail strip
|
20170918_04156.jpg Edna Bay, BC - 2017 Routing rub rail round over
| 20170918_04164.jpg Edna Bay, BC - 2017 An aft rub rail in place
| 20170918_04166.jpg Edna Bay, BC - 2017 An aft rub rail in place
|
20170919_04179.jpg Edna Bay, BC - 2017 Shaping rub rail nose
| 20170919_04186.jpg Edna Bay, BC - 2017 Force fwd rub rail into place
| 20170919_04189.jpg Edna Bay, BC - 2017 Looking good
|
20170920_04205.jpg Edna Bay, BC - 2017 20170920_04205
| 20170925_04250.jpg Edna Bay, BC - 2017 Use force when necessary
| 20170927_04285.jpg Edna Bay, BC - 2017 20170927_04285
|
20170929_04322.jpg Edna Bay, BC - 2017 Screws removed and doweled
| 20170929_04330.jpg Edna Bay, BC - 2017 Drilling for wiper motor shaft
| 20170929_04331.jpg Edna Bay, BC - 2017 Progress
|
20170929_04333.jpg Edna Bay, BC - 2017 Wiper motors installed temporarily
|