Working on the afterdeck.
Previously we glassed the interior hull sides. No pictures.
160811_02564.jpg Edna Bay, BC - 2016 Filling a gap with epoxied caulking
| 160811_02567.jpg Edna Bay, BC - 2016 Patching a bad seam
| 160813_02575.jpg Edna Bay, BC - 2016 Divots and seams filled with fillet mix. All will be sanded.
|
160814_02579.jpg Edna Bay, BC - 2016 Glassing starboard side with epoxy
| 160814_02581.jpg Edna Bay, BC - 2016 Drip epoxy, then spread with spatula
| 160814_02582.jpg Edna Bay, BC - 2016 Try to fill weave with a uniform layer of epoxy
|
160814_02583.jpg Edna Bay, BC - 2016 Trim excess cloth before epoxy cures
| 160814_02584.jpg Edna Bay, BC - 2016 Trim excess cloth before epoxy cures
| 160815_02595.jpg Edna Bay, BC - 2016 Martha laying port side cloth
|
160815_02599.jpg Edna Bay, BC - 2016 Ready for port side epoxy
| 160815_02600.jpg Edna Bay, BC - 2016 Epoxy started
| 160815_02603.jpg Edna Bay, BC - 2016 Almost done
|
160816_02609.jpg Edna Bay, BC - 2016 Buffer with scouring pad, water - epoxy film begone!
| 160816_02610.jpg Edna Bay, BC - 2016 160816_02610
| 160817_02616.jpg Edna Bay, BC - 2016 Finish coat - epoxy with sanding filler
|
160817_02617.jpg Edna Bay, BC - 2016 160817_02617
| 160817_02620.jpg Edna Bay, BC - 2016 160817_02620
| 160817_02622.jpg Edna Bay, BC - 2016 Afterdeck done except for a few "details"
|
160820_02628.jpg Edna Bay, BC - 2016 Trial assembly of dash and bulkhead panels
| 160821_02631.jpg Edna Bay, BC - 2016 Gluing supports to cabin bulkhead panels
| 160826_02649.jpg Edna Bay, BC - 2016 Sliding bulkhead panel into place carefully. Glue everywhere.
|
160826_02652.jpg Edna Bay, BC - 2016 Two bulkhead panels glued. Dash coming in a few minutes.
| 160826_02654.jpg Edna Bay, BC - 2016 Not perfect but not bad.
| 160826_02656.jpg Edna Bay, BC - 2016 Bulkhead and dash glued in. The last of the tricky structural jobs.
|
160828_02668.jpg Edna Bay, BC - 2016 Port side cabin roof panel, underside, epoxy clear coated
| 160828_02671.jpg Edna Bay, BC - 2016 Applying filler coat
| 160830_02691.jpg Edna Bay, BC - 2016 Clear coating port side roof panel, weather surface
|
160830_02692.jpg Edna Bay, BC - 2016 Same panel, applying filler coat
| 160831_02694.jpg Edna Bay, BC - 2016 The cutting table
| 160831_02695.jpg Edna Bay, BC - 2016 Martha laying cloth on starboard roof panel, weather surface
|
160831_02696.jpg Edna Bay, BC - 2016 Trimming excess
| 160831_02697.jpg Edna Bay, BC - 2016 Beginning epoxy saturation coat
| 160831_02698.jpg Edna Bay, BC - 2016 It takes lots of epoxy
|