140816_2494.jpg Edna Bay, BC - 2014 Only forward 6 feet of cabin sole remaining to be paneled
| 140816_2489.jpg Edna Bay, BC - 2014 140816_2489
| 140817_2495.jpg Edna Bay, BC - 2014 Applying epoxy glue where supports will contact
|
140818_2502.jpg Edna Bay, BC - 2014 Moving final deck panel to its home
| 140818_2503.jpg Edna Bay, BC - 2014 Dropping final deck panel into place
| 140818_2506.jpg Edna Bay, BC - 2014 At long last - all decking glued and screwed
|
140818_2509.jpg Edna Bay, BC - 2014 Saturating a piece of twine with epoxy glue
| 140818_2510.jpg Edna Bay, BC - 2014 Caulking with epoxy-saturated twine - modern day oakum
| 140824_0510.jpg Edna Bay, BC - 2014 Motor mount prototype 1.1 - to decide fore-aft length of mount
|
140825_0541.jpg Edna Bay, BC - 2014 Cabin storyboards
| 140826_0547.jpg Edna Bay, BC - 2014 Marking the sheer
| 140826_0548.jpg Edna Bay, BC - 2014 Sheer marked
|
140826_0551.jpg Edna Bay, BC - 2014 Cutting the sheer
| 140826_0553.jpg Edna Bay, BC - 2014 Cutting the sheer
| 140826_0562.jpg Edna Bay, BC - 2014 Fine cutting at the stem
|
140826_0564.jpg Edna Bay, BC - 2014 Sheer at stem
| 140826_0561.jpg Edna Bay, BC - 2014 Starboard sheer
| 140827_0571.jpg Edna Bay, BC - 2014 Cutting the port sheer
|
140827_0577.jpg Edna Bay, BC - 2014 Cutting a frame at the sheer line
| 140827_0578.jpg Edna Bay, BC - 2014 Port sheer
| 140827_0579.jpg Edna Bay, BC - 2014 Sheers cut
|
140829_0596.jpg Edna Bay, BC - 2014 Foredeck supports
| 140829_0598.jpg Edna Bay, BC - 2014 Foredeck supports
| 140830_0611.jpg Edna Bay, BC - 2014 Cabin extends aft to the upright
|
140830_0613.jpg Edna Bay, BC - 2014 Horizontal surface is the top of the dash
| 140830_0615.jpg Edna Bay, BC - 2014 Peter studying the fish finder
| 140830_0617.jpg Edna Bay, BC - 2014 Test of cabin height
|
140831_0627.jpg Edna Bay, BC - 2014 Prototype cabin
| 140831_0629.jpg Edna Bay, BC - 2014 Prototype cabin
| 140831_0625.jpg Edna Bay, BC - 2014 I'm trying to convince Martha that this is appropriate window treatment
|