Sept 26 - Freeing the boat from its foundation
Sept 27 - Starting to cradle the boat
Sept 28 - Turning the boat: The idea is to jack the boat high enough so it will rotate in its rope cradle.
                Stretch in the lines prevented this. It was up but not high enough. Doug George, Big Dave and
                Sam Anderson had to lift, drag, push and pull to force it over.
                A video will be posted after it is edited.

130926_1470.jpg Edna Bay, BC - 2013 From inside - the "nose cone"	130926_1471.jpg Edna Bay, BC - 2013 Looking aft	130926_1478.jpg Edna Bay, BC - 2013 Looking forward
130926_1479.jpg Edna Bay, BC - 2013 Peter crawling out after removing some fetters	130926_1484.jpg Edna Bay, BC - 2013 Jacking to see if boat is truly free	130926_1487.jpg Edna Bay, BC - 2013 It is!
130926_1492.jpg Edna Bay, BC - 2013 Line "cradle" is rigged	130927_1132.jpg Edna Bay, BC - 2013 Jacking up boat near bow- jack is underneath	130927_1133.jpg Edna Bay, BC - 2013 Three lines will form a cradle when boat is two feet higher
130927_1134.jpg Edna Bay, BC - 2013 Jacking up boat at the transom	130928_1143.jpg Edna Bay, BC - 2013 Martha and Doug rigging lifting line	130928_1496.jpg Edna Bay, BC - 2013 Peter attempting to tie a bowline
130928_1498.jpg Edna Bay, BC - 2013 Forward lifting line	130928_1503.jpg Edna Bay, BC - 2013 Doug thinking	130928_1504.jpg Edna Bay, BC - 2013 Doug explaining to Peter
130928_1507.jpg Edna Bay, BC - 2013 Boat rolled about 45 degrees	130928_1508.jpg Edna Bay, BC - 2013 Big Dave, Doug, Sam	130928_1510.jpg Edna Bay, BC - 2013 Boat right side up
130928_1511.jpg Edna Bay, BC - 2013 Sam's Diva	130928_1515.jpg Edna Bay, BC - 2013 Looking forward	130928_1516.jpg Edna Bay, BC - 2013 Looking aft