130701_0328.jpg Edna Bay, BC - 2013 FINAL PIECE of cloth waiting
| 130701_0332.jpg Edna Bay, BC - 2013 Hull epoxied, cloth draped
| 130701_0333.jpg Edna Bay, BC - 2013 Applying epoxy to seal cloth to hull
|
130701_0334.jpg Edna Bay, BC - 2013 Cutting the wet edge
| 130701_0335.jpg Edna Bay, BC - 2013 Removing cut edge
| 130701_0336.jpg Edna Bay, BC - 2013 Removing cut edge
|
130701_0339.jpg Edna Bay, BC - 2013 Top edge cut and being removed
| 130701_0342.jpg Edna Bay, BC - 2013 The finished product curing
| 130705_1185.jpg Edna Bay, BC - 2013 Aft 7 feet sanded. Our effort last year to smooth with epoxy and sanding filler resulted in an uneven surface.
|
130705_1186.jpg Edna Bay, BC - 2013 Applying a thin mix of epoxy and sanding filler. The intent is to get as smooth a surface as we can.
| 130705_1187.jpg Edna Bay, BC - 2013 Applying second coat
| 130705_1188.jpg Edna Bay, BC - 2013 Finished for the day.
|
130705_1190.jpg Edna Bay, BC - 2013 Finished for the day. The bottom is about a third done.
| 130708_1193.jpg Edna Bay, BC - 2013 Final two coats of epoxy applied to two-thirds of bottom
|