110705_0458m.jpg
Edna Bay, BC - 2011
Fairing the keelson
110705_0459m.jpg
Edna Bay, BC - 2011
Fairing the keelson
110705_0461m.jpg
Edna Bay, BC - 2011
Rope slings help position side panels
110705_0462m.jpg
Edna Bay, BC - 2011
Next - attach two side panels with a butt block
110705_0463m.jpg
Edna Bay, BC - 2011
Looking aft
110706_0476m.jpg
Edna Bay, BC - 2011
Prep for gluing: sanding where side meets frame.
The Dremel 6100 is a fantastic multi-purpose tool.
110706_0478m.jpg
Edna Bay, BC - 2011
110706_0478m
110706_0479m.jpg
Edna Bay, BC - 2011
Paint joint with straight epoxy,
then with glue mix
110707_0486m.jpg
Edna Bay, BC - 2011
Starboard side panel fully attached - at long last
110707_0488m.jpg
Edna Bay, BC - 2011
Looking forward
110707_0490m.jpg
Edna Bay, BC - 2011
110707_0490m
110707_0493m.jpg
Edna Bay, BC - 2011
110707_0493m
110708_0495m.jpg
Edna Bay, BC - 2011
Fairing a port side frame
110708_0496m.jpg
Edna Bay, BC - 2011
Making a port side butt joint
110721_0467p.jpg
Edna Bay, BC - 2011
Butt joint screwed and glued to port side forward sections
110726_0006p.jpg
Edna Bay, BC - 2011
Port side forward sections glued and screwed
110726_0007p.jpg
Edna Bay, BC - 2011
Port side forward sections glued and screwed