100315_4716m.jpg
Greenbrae, CA - 2010
100315_4716m
100315_4717m.jpg
Greenbrae, CA - 2010
100315_4717m
100315_4718m.jpg
Greenbrae, CA - 2010
100315_4718m
100315_4719m.jpg
Greenbrae, CA - 2010
100315_4719m
100315_4720m.jpg
Greenbrae, CA - 2010
100315_4720m
100315_4721m.jpg
Greenbrae, CA - 2010
100315_4721m
100315_4722m.jpg
Greenbrae, CA - 2010
100315_4722m
100315_4723m.jpg
Greenbrae, CA - 2010
100315_4723m
100315_4724m.jpg
Greenbrae, CA - 2010
The lower edge of the side "plank" is the
top rail (the sheer) of the finished boat
100315_4725m.jpg
Greenbrae, CA - 2010
Drawing sheer line on transom
100315_0340p.jpg
Greenbrae, CA - 2010
The stem will be cut to shape
100315_0341p.jpg
Greenbrae, CA - 2010
100315_0341p
100315_0342p.jpg
Greenbrae, CA - 2010
100315_0342p
100315_0343p.jpg
Greenbrae, CA - 2010
100315_0343p
100316_4726m.jpg
Greenbrae, CA - 2010
100316_4726m
100316_4727m.jpg
Greenbrae, CA - 2010
100316_4727m
100316_3344p.jpg
Greenbrae, CA - 2010
The stem will be trimmed to about 3/4"
and there will be a 3/4 x 3/4 keel
100318_3345p.jpg
Greenbrae, CA - 2010
Keel installed
Starting to epoxy
100319_4728m.jpg
Greenbrae, CA - 2010
Epoxying fiberglass tape over an
open edge seam
100319_4729m.jpg
Greenbrae, CA - 2010
100319_4729m
100319_4730m.jpg
Greenbrae, CA - 2010
100319_4730m
100319_4731m.jpg
Greenbrae, CA - 2010
100319_4731m
100319_4732m.jpg
Greenbrae, CA - 2010
100319_4732m
100319_4733m.jpg
Greenbrae, CA - 2010
Sealing hull with epoxy
100320_3346p.jpg
Greenbrae, CA - 2010
Fiberglass tape trimmed
100320_4794m.jpg
Greenbrae, CA - 2010
Hull sawn free and upright
100320_4795m.jpg
Greenbrae, CA - 2010
100320_4795
100320_4796m.jpg
Greenbrae, CA - 2010
Trimming the frames
100320_4797m.jpg
Greenbrae, CA - 2010
Done
100320_4798m.jpg
Greenbrae, CA - 2010
Ready for sea trials
100320_4803m.jpg
Greenbrae, CA - 2010
The bottom at the bow is not according to plan
and it looks wrong. The chine should follow
the pencil line but building this is difficult.
100321_3352p.jpg
Marin, CA - 2010
Sea trials on Marin Civic Center lagoon